home *** CD-ROM | disk | FTP | other *** search
- TURTLE BEACH TROPEZ
- Installation Utility for Windows95 (Version 4.00.31)
- 07 18 96
-
-
- SOFTWARE PACKAGE CONTENTS
-
- The Windows95 Tropez software package contains (2) 3.5" 1.44M diskettes,
- for the installation of DOS mode and Windows95 drivers.
-
-
- INSTALLATION PROCESS
-
- It is recommended that you print this out and have a hard copy in
- front of you while installing the drivers.
-
- While the installation of the new drivers should remove the older
- drivers, it is highly recommended that you follow these steps to
- avoid any type of conflicts and speed up installation.
-
- If this is a fresh installation (the Tropez is not currently installed)
- then proceed to "Section III - Installing Drivers". If the Tropez is
- already installed on your Windows95 system, then please continue to
- uninstall the current Tropez setup before proceeding. "Section I" is
- for uninistalling the Tropez drivers you received from Turtle Beach.
- "Section II" is for uninstalling previous versions of the beta Tropez
- drivers from David Gasior.
-
-
-
- SECTION I
- UNINSTALLING WINDOWS3/WINDOWS95 DRIVERS
- (provided by Turtle Beach Systems)
-
- If the Tropez uninstall feature is available, don't use it as
- it will uninstall all the applets (like Mouse Player) in add-
- ition to all the drivers. This driver package includes only
- the drivers.
-
- 1. Within Windows95, click on the START button, and select RUN. In
- the filename box, type SYSEDIT.EXE (System Editor). If you do not
- have this program installed, then you can use Notepad or any other
- text editor to do this.
-
- 2. Let's attack the SYSTEM.INI file first. Scroll down to the [386Enh]
- section and remove the line that reads
-
- device=vsndsys.386
-
- Then scroll down to the [drivers] section and remove the lines
-
- midi*=tropmidi.drv
- midi*=opl3.drv
- wave*=tropez.drv
- aux*=tropez.drv
- mixer=tropez.drv
-
- The * means that there may be a number after the device. Then
- scroll down toward the end of the file and entirely remove the
- following sections (both the header and the lines beneath that
- header).
-
- [sndsys.drv]
- [opl3.drv]
- [tropmidi.drv]
-
- 3. Next, the AUTOEXEC.BAT file. Remove the lines
-
- SETUPSND.EXE /a??? /i? OSWF.MOT
- SET BLASTER=a??? i?? d? t?
-
- where the ??? would be numerical settings. Then remove any lines
- pertaining to the following programs
-
- TZHKMIX.EXE
- TZACMIX.EXE
- TZMODE.EXE
-
- 4. And finally, the CONFIG.SYS file. Remove the line
-
- device=C:\TZMODE.EXE
-
- 5. The Tropez is now uninstalled. Go to the Device Manager, and check
- to see what is listed under 'Sound, Video, and Game Controllers'.
- If the Tropez is listed, then highlight it, and remove it. Then
- proceed to "Section III".
-
-
-
- SECTION II
- UNINSTALLING WINDOWS95 BETA DRIVERS
- (provided by David Gasior)
-
- 1. In Windows95 (NOT Safe Mode), go to the Device Manager and double
- click on 'Sound, Video, and Game Controllers'. Highlight the
- 'Turtle Beach Tropez' and remove it. It should remove the 'Turtle
- Beach Tropez', the 'Turtle Beach Tropez Digital Audio' and the
- 'Gameport Joystick' if it was installed. Once the references to
- the Tropez are removed, exit the Device Manager.
-
- 2. Click on the START button, and select RUN. In the filename box,
- type SYSEDIT.EXE (System Editor). If you do not have this program
- installed, then you can use Notepad or any other text editor to do
- this.
-
- 3. In the SYSTEM.INI file, scroll down to the [drivers] section and
- remove the line
-
- midi*=tropmidi.drv
-
- where the * may be a number after the device. Then scroll down the
- file toward the end and remove the section (the header and all lines
- beneath it)
-
- [tropmidi.drv]
-
- 4. Next, the AUTOEXEC.BAT file. Remove the lines
-
- SET BLASTER=a??? i?? d? t?
- SET SOUND16=\SOUND16
- SNDINIT /b
-
- where the ??? would be numerical settings. Then remove any lines
- pertaining to the following programs
-
- VOLTSR.EXE
-
- 5. And finally, the CONFIG.SYS file. Remove the line
-
- device=C:\CDSETUP.SYS
-
- 6. Next, start the Windows Explorer and choose 'View' from the menu,
- then select 'Options' at the bottom of the list. On the 'View'
- tab, select 'Show all files' from the 'Hidden Files' section (if
- not already selected) and click OK.
-
- 7. Now select 'Tools' from the Explorer menu, then 'Find', then
- 'Files or Folders'. A new dialog box will open titled "Find:
- All Files". On the 'Name & Location' tab, change the box that
- reads 'Look in:' to the hard drive which Windows95 is installed
- on to.
-
- 8. Next, click on the 'Advanced' tab, and use the drop down list box
- marked 'Of type:' to bring up the setting "Setup Information".
- Then, in the box that reads 'Containing text:', type in "Tropez".
- It should look like ...
-
- Containing text: Tropez
-
- Then click on the 'Find Now' button to begin searching.
-
- Since Windows95 keeps a record of everything you have ever
- installed, we want to make sure that it "forgets" about the older
- Tropez installations, so we are going to remove their references.
-
- 9. One or more OEM?.INF files will appear in the search box below.
- Delete them by clicking on the <DELETE> key on your keyboard, or
- by dragging them into the Recycle Bin.
-
- If the search finds nothing, be sure that you have the following
- search conditions:
-
- Of type: Setup Information
- Containing text: Tropez
-
- Also make sure that you are searching the entire drive and not
- just a single directory (see step 6).
-
- 10. Once those files are deleted, you can go ahead and continue with
- Section III - Installing the Drivers.
-
-
-
- SECTION III
- INSTALLING THE DRIVERS
-
- 1. Make sure you have the driver disks handy. If you downloaded this
- driver package, then you need to copy all the files from the ZIP
- file onto two floppy disks. The files in the DISK1 directory should
- go on to a floppy disk marked "Disk 1" and the files in the DISK2
- directory should go on to a floppy disk marked "Disk 2". The
- driver should not be installed from a hard disk directory.
-
- 2. If Windows95 is running, select the START button and select SHUT
- DOWN, then 'Shut Down the Computer'. When you are clear to do so,
- power off the computer, and plug the Tropez card into a slot.
-
- Even if the card is already installed, powering down is still a
- good idea. Leave the computer off for about a minute. Turning
- the computer off and then right back on can damage the peripherals
- inside.
-
- 3. Power on the computer. While it is booting up, hit the F8 key as
- soon as you see the message "Starting Windows95...". From the menu,
- select 'Safe Mode'. It will take a few minutes, but once you've
- entered Safe Mode, go to the Device Manager and double-click on
- 'Sound, Video, and Game Controllers'. Make sure that there is
- nothing listed there (aside from sound peripherals that you may
- still have in the system).
-
- Even though you may have uninstalled them before, Windows95 has
- the nasty habit of letting some drivers hang around.
-
- When you are finished, close the Device Manager. Click on the
- START button, then SHUT DOWN. Select 'Restart the computer' and
- let it reboot.
-
- 4. Once you enter Windows95 again, double-click on the My Computer
- icon and then on the Control Panel icon. Then double-click on
- the Add New Hardware icon.
-
- 5. When Windows95 asks you to search for new hardware, select 'no'
- and proceed to the next window.
-
- 6. Windows 95 will display a list of device categories that you can
- install from. Select 'Sound, Video, and Game Controllers', and
- then 'Next' to proceed.
-
- 7. Windows 95 will display another list of manufacturers and their
- products. Place Disk 1 (of this driver package) in your floppy
- drive, and click on the 'Have Disk...' button. It may bring up
- a dialog box asking which drive the disk is in. Select the drive
- the disk is in.
-
- 8. Once the disk is read, Windows95 will bring up a list of devices
- you can install. This list will have four options. Each must be
- installed individually, though all four do not have to be installed
- for the Tropez to operate.
-
- Turtle Beach Tropez
- This option is for the digital audio portion of the Tropez. This
- is what provides the sounds for system events and sound effects in
- games.
-
- Turtle Beach Tropez CD ROM Controller
- This option is for those who are using the Tropez as the controller
- for their CD ROM drive. If your CD ROM drive is hooked up to the
- motherboard or another EIDE card, do not install this option.
-
- Turtle Beach Tropez Joystick Port
- This option is for hooking a joystick up to the Tropez. This will
- work only once the SNDINIT program has run to enable the joystick
- port.
-
- Turtle Beach Tropez MPU-401 Port
- This option is for those people who want to activate the internal,
- second MIDI port on the Tropez. This will work only once the
- SNDINIT program has run to enable the MPU-401 port. This is not
- needed for wavetable synthesis.
-
- Turtle Beach Tropez WaveFront Synthesizer
- This option is for the wavetable MIDI chip on the Tropez. This is
- what provides the realistic instrument sounds when playing MIDI
- files and games.
-
- 9. Click on the Turtle Beach Tropez and then click on 'Next' to install
- the drivers. Windows95 will allow you to view the settings (via the
- 'Details' button) that it has determined will work for your system.
- Don't worry; you can change those later if you want to. Windows95
- will then copy some files from the floppy disk then prompt you to
- finish. Click on 'Finish' and you will be asked to restart your
- system. Select 'yes' and restart.
-
- 10. When the computer reboots, a new program called SND4DOS will run
- before Windows95 loads. This is a one time only occurrence. It
- will ask you if you want to set up the Tropez for Real Mode DOS.
- This is if you have a game or other program requiring sound that
- refuses to play under Windows95. Select 'Yes' to install these
- drivers.
-
- 11. When it comes time to pick the CD ROM attached to your Tropez, you
- have many options. If your CD ROM drive is listed, you can either
- select it from the list (and have a driver installed for it) or if
- it is already installed, select 'Other (IDE)' (and have the Tropez
- IDE interface activated, but no specific driver installed).
-
- Even if you will never use your CD ROM drive in Real Mode DOS, you
- must select 'Other (IDE)' as your choice, or the IDE interface on
- the Tropez will not be activated and therefore, will not work in
- Windows95.
-
- If your CD ROM is being controlled by something other than the
- Tropez (such as a motherboard IDE or an EIDE controller) select
- 'None' from the list to disable the IDE interface of the Tropez.
-
- 12. Once the SND4DOS program completes, it will reboot the computer and
- go back into Windows95. You can then use the Device Manager to
- make any changes to the digital audio settings that you need to.
-
- 13. To install any of the other Tropez options, follow the above steps
- 4 - 8 again. This time, though, you will highlight whichever option
- you desire and click on 'Next' to install the drivers. When you are
- prompted to restart (or shut down) the computer, select 'no' and you
- can continue to add the other options. Once you are done adding,
- select 'yes' to restart the computer.
-
- The WaveFront port address is based on the hardware jumper settings
- on the Tropez sound card. This port address must match what you
- have the Tropez set to in order to work. Windows95 cannot determine
- the jumper settings and will default to port 330 (if it does not
- conflict with another device). You can change this after restarting
- the computer to whatever your jumpers are set at.
-
-
-
- SECTION IV
- CHANGES TO YOUR SYSTEM
-
- Once the SND4DOS programs runs and reboots the computer, your
- CONFIG.SYS and AUTOEXEC.BAT files will be changed. These are
- the lines that have been added/modified.
-
- CONFIG.SYS
-
- DEVICE=C:\SOUND16\CDSETUP.SYS /T:I
- (if the Tropez is acting as the CD ROM controller)
- DEVICE=C:\SOUND16\CDROM.SYS /D:MSCD000
- (if you selected your CD ROM from the list - file name
- will be different depending on CD ROM selected)
-
- You can manually edit the CDSETUP.SYS line if you ever change the
- Tropez's status. The "/T:I" parameter enables the IDE interface
- on the Tropez. Changing it to "/T:X" will disable the interface
- If you are using an IDE CD ROM drive attached to another controller,
- make sure the Tropez's interface is disabled or they may conflict.
-
- AUTOEXEC.BAT:
-
- PATH=C:\SOUND16 (appended)
- SET SOUND16=C:\SOUND16
- C:\SOUND16\SNDINIT /B
- SET BLASTER=A220 I5 D1 T4
- (settings may differ from these)
-
- SYSTEM.INI
-
- All changes to Windows will be made in the Registry, and nothing
- will appear in the SYSTEM.INI file. All previous entries will be
- deleted, hopefully.
-
-
-
- SECTION V
- SNDINIT.EXE - WHAT IT DOES
-
- SNDINIT is the new initialization/configuration program. This
- program runs at bootup to initialize the Tropez. You can also
- run the program from the command line to change the Tropez's
- settings.
-
- You can type the following command at the DOS prompt to get a
- list of parameters for the SNDINIT program.
-
- SNDINIT /?
-
- SNDINIT replaces TZMODE. TZMODE (and TZSETUP) should no longer
- be used. Your TZACDOS.INI file is also no longer needed.
-
-
-
- SECTION VI
- VOLTSR.EXE - WHAT IT DOES
-
- The volume control memory resident program, VOLTSR.EXE, allows
- you to change volume using hot keys while you are in Real Mode
- DOS. The program must be run first for the hot keys to be act-
- ivated. The hot keys are
-
- Ctrl-Alt-U Raises the volume
- Ctrl-Alt-D Lowers the volume
- Ctrl-Alt-M Mute
-
-
-
- SECTION VII
- KNOWN PROBLEMS AND WORKAROUNDS
-
- 1) The original code download configuration file (OSWF.MOT) has been
- renamed to WFTROP.MOT to conincide with the driver name. When
- running SETUPSND in DOS mode, please point it toward the new MOT
- file, and not the older one.
-
- 2) This installation copies a new WFPATCH.INI into your Windows95
- directory. This file lists the locations of the WaveFront banks
- (which you may or may not have all installed). You may need to use
- Notepad (or another text editor) to edit the file to change the
- directory to where the file(s) actually is/are.
-
- 3) Full Duplex mode is available using these drivers. EnchancedFull
- Duplex mode is not available. This means that the WAV files you
- are working with must have the same sample settings (kHz, bit depth,
- and mono/stereo).
-
- 4) If you play a DOS game from within Windows95, and it uses the Tropez
- as a General MIDI card, there is a good chance that Windows95 will
- "lose" the WaveFront synthesizer on return to Windows95. You must
- restart Windows95 to get it back.
-
-
-
- SECTION VIII
- SOUND BLASTER SUPPORT UNDER WINDOWS 95 DOS BOX
-
- With these drivers, the Tropez can now act as both a Sound Blaster
- and Windows Sound System card under Windows. When setting up your
- DOS games, be sure that the sound card settings are the same as
- the settings that Windows95 assigns if this game will be played in
- a DOS window.
-
- You can have different settings for SB in Windows95 and Real Mode
- DOS if you wish, but games played under Windows95 will use the
- settings defined in the Device Manager. These may be configured
- at any time, and maybe changed as often as necessary for games
- that require different settings.
-
- Many DOS games have a difficult time running under Windows95. They
- were not designed to do it. To ensure the most ideal environment
- for these games, it is recommended you modify the Properties of
- the shortcuts that you create for each DOS game. On the "Misc" tab
- of the properties sheet, you can adjust the Idle Sensitivity
- property to High, and deselect all other options that may be
- checked.
-
- You can control the volume of sound in DOS programs running in a
- window. These will not work on some games, notably the ones that
- run in protected mode, such as DOOM and Rise of the Triad. The
- following are the hot keys to use.
-
- <CTRL>+<ALT>+M = Decrease Master Volume
- <SHIFT>+<ALT>+M = Increase Master Volume
- <CTRL>+<SHIFT>+M = Mute Master Volume
-
- <CTRL>+<ALT>+V = Decrease Digital Sound Volume
- <SHIFT>+<ALT>+V = Increase Digital Sound Volume
- <CTRL>+<SHIFT>+V = Mute Digital Sound Volume
-
- <CTRL>+<ALT>+F = Decrease FM Music Volume
- <SHIFT>+<ALT>+F = Increase FM Music Volume
- <CTRL>+<SHIFT>+F = Mute FM Music Volume
-
-
-
- SECTION IX
- WINDOWS95 BASIC CONFIGURATIONS
-
- The Tropez can use one of three different basic configurations for the
- digital audio. Basic Configuration 0 is the default and provides both
- native 16bit audio support and Sound Blaster Pro support as well as FM
- synthesis within Windows95. Basic Configuration 1 provides only native
- 16bit audio support and FM synthesis. Basic Configuration 2 provides
- only native 16bit audio support.
-
- Why would you need to change these? Well, you shouldn't, unless you are
- running into conflicts or need to free up resources. By removing the
- SB compatibility, you only free up one port which is not a big deal; your
- computer has hundreds of ports available. However, theoretically (we
- have not tested it; please don't call with support questions on it), you
- could install both a SB16 and Tropez in your system if you were to use
- Basic Configuration 2. By removing the SB compatibility and FM synthesis,
- you remove any chance for conflicts. This would mean using the Tropez
- for its clean audio playback and recording capabilities, and the SB16
- for native DOS game support.
-
- But for optimal configuration of the sound card, just leave it at the
- default of Basic Configuration 0.
-
-
- SECTION X
- FULL DUPLEX SUPPORT
-
- The Tropez is an excellent sound card to use for applications like
- InternetPhone(tm), because of its full duplex capabilities. To
- enable Full Duplex mode, go to the Control Panel and select the
- Multimedia icon. Select the Advanced tab, and click on the Tropez
- under Audio Devices, and then Properties, then settings. Be sure
- that the "Single Mode DMA" option is not checked.
-
- You must also make sure that you have selected a configuration that
- has two DMA channels being used. They must be different and paired
- as follows.
-
- Playback DMA: 0 1 3
- Recording DMA: 1 0 0
-
- This driver also does not allow EnhancedFull duplex mode. It will
- only work as Full duplex mode.
-
- The difference between the two is that Full duplex mode allows you
- simultaneous record and playback when the two files in use are set
- to the same sampling rate. In other words, both files would need
- to be 22kHz/16bit/stereo or both would need to be 44kHz/8bit/mono,
- etc.
-
- EnhancedFull duplex mode allows you simultaneous record and playback
- with the files being at differing sampling rates. Since the Tropez
- does not have a DSP, this puts an enormous amount of work on the
- system's CPU. It has not been implemented in this driver release,
- and may or may not be implemented in an upcoming release.
-
-
-
-
- There is no futher information at this time.
-